Begin by cutting the dowel flush to the surface of the component with a sharp saw. Using a sharp brad point bit 1/32nd-1/16th smaller than the diameter of the dowel, drill out the center of the dowel. Hold the part in a padded vise. When the bit reaches the bottom of the dowel hole, you will feel the bit "slip" a bit and you can stop. Using a sharp gouge with a sweep that matches the curve of the dowel circumference, pare the excess dowel away from the sides of the hole. To clean the hole run a drill bit the correct diameter backwards. (A new bit can catch and rip the hole apart if run forward.)
Don't use new dowels to check the fit. These can seize in the joint and become difficult to remove. Use dowels that have been pared or sanded undersized. These are easier to remove after a trial fit.
#Furniture #Repair #Jointing #pub#other-favorites #historic-bookmarks
We're proud to offer the finest EPDM Roofing sheet (ethylene propylene diene monomer rubber) rubber roofing materials, EPDM supplies, EPDM adhesives and EPDM accessories from Weatherbond (division of Carlisle Construction Materials), Versico and other top suppliers. These EPDM Roofing products are engineered for the toughest applications including commercial buildings, RV's, pond liners, rooftop gardens, decks, residential, pond liners, landscaping and more.
We specialize in complete roof repair kits for all types of EPDM Repairs and replacement or repair of EPDM roofs including RV rubber roofs, commercial roofs, patios, etc. For DIY we have complete installation instructions.
#EPDM #Sloped #roof #pub#other-favorites #pin #historic-bookmarks